Building a V2. Follow along and see how I did the V2.

Equipment used:

  • 2 HS125MG servos for ailerons
  • 1 EXPERT SL451 Servo for Elevator
  • 1 RX770 SPCM receiver
  • 1 N700 4.8v 700Mah AA sq. pack.
  • 1 Switch assy
  • 2 24" servo leads
  • 1 4 pin Deans connector
  • 1 F3X 1/2" Carbon ballast tube. (This is a optional accessory)
P1000036